ProSolv 3.1 Poly Remove Adhesive

     

    GRS ProSolv 3 mil  Polymeric Print Vinyl Air Egress Removable Adhesive 

    GRS ProSolv High Performance Polymeric Print Vinyl is a 3.15 mil Premium White calendared film with either a Gloss or Matte finish and a removable pressure sensitive adhesive with air-release and a stay-flat 90 lb. liner. This film is designed to accept a variety of solvent-based, latex and UV curable inks and is a great option for challenging applications, Fleet Graphics, or for those looking for a 5-year intermediate laminate.

     

Available Options

You Must be Logged in to Add the Item to your Cart.

Click Here to Login

Click Here to Register for a new Account

Description

    GRS ProSolv 3 mil  Polymeric Print Vinyl Air Egress Removable Adhesive 

    Face Film

     

    • Face Film: White POLYMERIC Print Film
    • Gauge: (ISO 2286-3) 3.15 mil (80 micron) nominal
    • Printer Compatibility: Latex, Eco-Solvent, Solvent, UVC, UV Gel

     

    Adhesive

     

    • Type: Removable grey solvent-based acrylic with air channels/bubble free
    • Application temperature: +5C to +60C
    • Service temperature: -30C to +110C

    Release Liner

     

    • Weight: 146 gsm nominal
    • Type: Structured lay-flat with PE coating

    Finishes

     

    • Gloss
    • Matte

    Roll Size

     

    • 54" x 150'

     

    Durability

     

    • Promotional to Intermediate
    • Shelf Life: 1 years from date of manufacture when stored in proper conditions 70*F and 50% RH.
    • External weathering: 5 years*. This refers to the unprinted vinyl. Refer to ink manufacturer for
      the durability of the finished product.
    • *Estimate under normal conditions, Mid-Country, USA

    Application

     

    • Flat Surfaces and Mild Curves
    • Allow a minimum of 24-48 hours for the solvents to dry off before application of overlaminate. Depending on the print and drying conditions this can often be in excess of 48 hours. Retained solvents will reduce adhesion levels.
    • Successful application requires the necessary techniques.
    • Do not overstretch as this will cause the application to fail.
    • The user should determine the suitability of the substrate.
    • Handling and Finishing
    • Avoid touching material or introducing dust and dirt onto print face. This can cause anomalies and artifacts when printed.
    • Always store unused material wound tight on original packaging.
    • Product can be used with or without lamination.