GRS ProSolv 3 mil Polymeric Print Vinyl AE
Is a 3.15 mil Premium White vinyl with either a Gloss or Matte finish and a permanent pressure sensitive adhesive with air-release and a stay-flat 90 lb. liner. This film is designed to accept a variety of solvent-based, latex and UV curable inks and is a great option for challenging applications, Fleet Graphics, or for those looking for a 5-year intermediate vinyl. It is available in a gloss or matte finish.
You Must be Logged in to Add the Item to your Cart.
Description
GRS ProSolv Gloss 3.1 ml Polymeric Print Vinyl
Key Features and Benefits
Face Film
Face Film: White POLYMERIC Print Film
Gauge: (ISO 2286-3) 3.15 mil (80 micron) nominal
Printer Compatibility: Latex, Eco-Solvent, Solvent, UVC, UV Gel
Adhesive
Type: Permanent grey solvent-based acrylic with air channels/bubble free
Application temperature: +5C to +60C
Service temperature: -30C to +110C
Release Liner
Weight: 146 gsm nominal
Type: Structured lay-flat with PE coating
Finish
Gloss or Matte
Roll Size
54" x 150'
Durability
Promotional to Intermediate
Shelf Life:
1 years from date of manufacture when stored in proper conditions 70*F and 50% RH.
External weathering: 5 years*. This refers to the unprinted vinyl. Refer to ink manufacturer for
the durability of the finished product.
*Estimate under normal conditions, Mid-Country, USA
Application
Flat Surfaces and Mild Curves
Allow a minimum of 24-48 hours for the solvents to dry off before application of overlaminate. Depending on the print and drying conditions this can often be in excess of 48 hours. Retained solvents will reduce adhesion levels.
Successful application requires the necessary techniques.
Do not overstretch as this will cause the application to fail.
The user should determine the suitability of the substrate.
Handling and Finishing
Avoid touching material or introducing dust and dirt onto print face. This can cause anomalies and artifacts when printed.
Always store unused material wound tight on original packaging.
Product can be used with or without lamination.