Trans Gloss Clear Vinyl 3.1 ml

PHYSICAL PROPERTIES: TEST METHOD

Peel Adhesion, lb. /in. (N/25mm) FTM - 1

180° on Stainless Steel - 24 hr. 3.1 - 3.7 (12 - 18)

Quick Tack on SS, lb. /in² (N/25mm) 4.4 - 5.6 (20 - 26) FTM - 9

Dimensional Stability, (%) FTM - 14

48 hours @ 158°F max 0.2 10” x 10” Sample

bonded to aluminum.

Temperature Ranges,

Minimum Application: 50°F (+10°C)

End Use: -40°F to 194°F (-40°C to 90°C)

INTENDED FOR: Wide format, eco-solvent, solvent-based and UV-cured inkjet printing. To achieve

the best possible print quality, please make sure that the correct ICC profiles or printer settings are used.

Profiles can be obtained from our Distributors or can be downloaded from www.mactac.com . Printer and

heater settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s

websites. The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of

printing systems, inks and software can significantly affect output. It is the customer’s responsibility to

determine the suitability of any profile for use in their specific print environment.

1) The user is responsible for determining the product’s suitability, including adhesion and if

needed, removal characteristics when used in applications other than listed specifically in

this Performance Guide.

2) If there are any questions about applications, please contact your MACtac sales

representative to discuss your requirements for recommendations.

3) If this is a printed Performance Guide it is an uncontrolled document. Please check the

MACtac website for the latest, most up-to-date version.

IMPORTANT NOTICE: The information given and the recommendations made herein are based on our research and are believed to be accurate, but no guarantee of their accuracy or completeness is made. In every case, user shall determine before using any product in full scale production, or in any way, whether such product is suitable for user’s intended use for their particular purpose under their own operating conditions. User assumes all risk and liability whatsoever in connection with their use of any product. The products discussed herein are sold without any warranty as to merchantability or fitness for a particular purpose, or any other warranty, express or implied. No representative of ours has any authority to waive or change the foregoing provisions, and no statement or recommendation not contained herein shall have any force of effect unless in an agreement signed by the officers of seller and manufacturer. Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to constitute a permission, inducement or recommendation to practice any invention covered by any patent without authority from the owner of the patent. The following is made in lieu of all warranties, express or implied: Seller’s and manufacturer’s only obligation shall be to replace or credit such quantity of the product proved to be defective at its discretion.

TM Trademark of Morgan Adhesives Company.

® Registered Trademark of Morgan Adhesives Company.

www.MACtac.com

DURABILITY: The outdoor durability of the unprinted film is 5 to 7 years. Overlamination of the

inkjet-printed material with IMAGin overlaminates delays eventual color fading that may occur over

time. This color fading is mainly dependent upon the inks quality (see technical data sheets given by the

ink manufacturers) and the pressure sensitive media being used.

REMOVAL: While this film is designed to be a permanent application on glass, it is still easily removed

with little to no adhesive residue. Gently lift one corner and slowly, but firmly, peel off the window at a

90° angle. For larger graphics it helps to score the graphic with a knife in strips 5” - 6” wide by the

length of the window and then peel off one strip at a time.

RECOMMENDATIONS:

Always test your combination of JT5000 products, inks and laminating films prior to commercial use.

1) Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. The maximum

allowable ink saturation is 270%.

2) Drying Requirements: Solvent, Eco-solvent and Mild-solvent inkjet prints require 24 - 48 hr. drying

time - open to the air. Inks do not dry when printed media is rolled up. The prints must be dry prior to

lamination.

3) Transportation Conditions: To allow for easy transportation, IMAGin JT5000 series can be rolled

up, with the image out, with a minimum diameter of 6 inches (15cm). When the image is not

protected by an overlaminate, make sure the print is completely dry and protected in a plastic bag.

During transportation or storage, avoid exposing them to extreme temperature and humidity changes.

4) Application: Do not use wet application method for installation. This product is designed to be

applied without the use of application fluids. The air-egress technology allows for fast bubble-free

applications.

SHELF LIFE:

2 years from D.O.M. when stored at 60/77°F (15/25°C) and 50% relative humidity in the original

package.

* Values given are typical and are not necessarily for use in specification.