PermaFlex®PRODUCT: IP6000 15 Mil Lustex® PERMACOLOR® The PermaFlex® overlaminating films is a family of relatively thick films that are coated with pressure sensitive adhesive on one side. These unique films can be laminated to either one or both sides of photographic prints, transparencies and digital images (inkjet, electrostatic, and thermal) to impart protection, surface texture and enough rigidity to eliminate the need for mounting to traditional flat substrates in many applications.
You Must be Logged in to Add the Item to your Cart.
Description
PermaFlex® PRODUCT: IP6000 Lustex®
PERMACOLOR® The Permacolor system is a series of pressure sensitive products for mounting and overlaminating in the imaging industries. Pressure sensitive Permacolor provides fast, efficient processing through cold roll lamination techniques without the need for heat, drying or messy coating operations.
PRODUCT DESCRIPTION The PermaFlex® overlaminating films is a family of relatively thick films that are coated with pressure sensitive adhesive on one side. These unique films can be laminated to either one or both sides of photographic prints, transparencies and digital images (inkjet, electrostatic, and thermal) to impart protection, surface texture and enough rigidity to eliminate the need for mounting to traditional flat substrates in many applications. These laminates also retain enough flexibility to allow images to be used in non-flat configurations such as on cylindrical displays. This feature also permits the laminates to be rolled for easy shipping or storage. IP6000 is a 15-mil film with a special “Lustex” surface. The low gloss texture helps eliminate glare and provides a very unique and pleasing viewing surface. This product can be used as an overlaminate for indoor as well as outdoor applications. IP6000 not only provides protection from abrasion and moisture, it also helps retard color fade caused by ultra violet (UV) light exposure. IP6000 exceeds industry standards for slip resistance, when tested according to ASTM D2047.
TYPICAL VALUES*
PHYSICAL PROPERTIES TEST METHOD
Thickness, inches (μm) ASTM D-645
Film plus adhesive 0.0165 (419)
Flame Resistance - Underwriters Laboratories Classified as to Surface Burning Characteristics
Flame Spread 10 UL - ANSI/UL-723
Smoke Developed 70 CAN/ULC - S102M
(control No. 2P72)
ANSI Class A
NFPA Class A
UCB Class I
White light Transmission, % 92 MACtac CTM-67
(Note: Glass = 100)
Gloss (60° angle) 12 ASTM D-523
Temperature Range Guidelines
Application: Above 50°F (10°C) for best results.
End Use: -20° to 200°F (-29° to 93°C)
Adhesive pH Neutral TAPPI –529
Direct Food Contact FDA conditions of Use B through H 21 CFR 177.1580
Subsections (a), (b) & (c)
Co-efficient of Expansion 1.7 X10-5 in/in/°C ASTM D696
IMPORTANT NOTICE: The information given and the recommendations made herein are based on our research and are believed to be accurate, but no guarantee of their accuracy or completeness is made. In every case, user shall determine before using any product in full scale production, or in any way,
whether such product is suitable for user’s intended use for their particular purpose under their own operating conditions. User assumes all risk and liability whatsoever in connection with their use of any product. The products discussed herein are sold without any warranty as to merchantability or fitness for a particular purpose, or any other warranty, express or implied. No representative of ours has any authority to waive or change the foregoing provisions, and no statement or recommendation not contained herein shall have any force of effect unless in an agreement signed by the officers of seller and manufacturer. Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to constitute a permission, inducement or recommendation to practice any invention covered by any patent without authority from the owner of the patent. The following is made in lieu of all
warranties, express or implied: Seller’s and manufacturers’ only obligation shall be to replace or credit such quantity of the product proved to be defective at its discretion.
TM Trademark of Morgan Adhesives Company.
® Registered Trademark of Morgan Adhesives Company.
www.MACtac.com