theme600
theme600
Keencut Sabre Series 2
The Sabre Series 2 is a genuine all round cutter bar that will slice through 13mm (1/2 inch) thick foamboard or trim tissue paper gently. It is perfect for the print shop, workshop, studio, architects’ practice, or educational institution. It’s simple to use, incredibly versatile and purposely designed for your safety.
You Must be Logged in to Add the Item to your Cart.
Keencut's Sabre Series 2
Features
Versatile
The Sabre Series 2 will safely cut a wide range of materials, up to 13mm (1/2") thick and 3m (120") wide. It is a fully mobile cutting solution with no need for calibration when installed. Its strong base will compensate for a substandard work surface to provide a stable cutting platform and it will sit directly on a bench or can be mounted on an optional stand that has the capacity to be fitted with a waste catcher and roll feed to become the perfect production cutter.
Secure and accurate
The Sabre Series 2 has guaranteed 1.0mm (0.04 inch) accuracy. Full-length silicone grip strips in the base and underside of the cutter bar hold your cutting media firmly in place. The integral base plate has metric parallel indents and a cut groove to assure accuracy. Floating, self-adjusting hinges automatically adjust to give lay-flat cutting on materials up to 13mm (1/2 inch) thick and holds the slideway above the work-surface for easy repositioning of the media.
Safety by design
The Sabre Series 2 is designed to provide maximum operator safety for all users in a wide range of environments such as commercial offices, industrial workshops or craft studios. It provides a controlled and measured method of cutting for a wide range of materials, removing all the dangers of using a hand knife. The Sabre securely clamps the media, and the blade is always under control. The automatic blade retraction and safely contained blades also protect the user when placing material on the cutter.
Simple to use
The Sabre Series 2 is simple to operate, requiring little training. The ergonomically designed cutting head allows single-handed cutting action and uses downward pressure to engage the blade. The single tool head offers a choice of three blade holders which can be switched safely and quickly to suit different materials. Blade changing and depth adjustment are simple and completed without the use of additional tools.
Perfect for the educational environment
The level of safety and simplicity of use makes the Sabre Series 2 perfectly suited for use by inexperienced operators in educational environments.
Multiple heads for maximum flexibility and performance
The Sabre Series 2 has three blades as standard:
Graphik blade holder: designed for the sign maker and digital printer with a specially crafted knife edge for extra stability in tougher materials and a cutting depth of up to 13mm (1/2 inch). By running the blade backwards, acrylics can be scored for snapping. The reversible blades have the ability to be set to cut left-right or right-left.
Rotary blade holder: cold cuts textiles and other delicate materials and is ideal for trimming thin strips off banners and posters where a knife blade would be too aggressive. It is fitted with a red safety blade guard to be engaged when not in use. A cutting mat is required to be used when using the rotary blade holder, please note this is not supplied.
Medium duty blade holder: uses standard off-the-shelf medium duty utility blades for general purpose, economical cutting and can be adjusted to cut materials up to a depth of 10mm (3/8 inch).
Minimal maintenance
The slide system is designed for operator adjustment and minimal maintenance and the Sabre Series 2 is calibrated for immediate ‘out of the box’ accuracy.
Five year guarantee
By manufacturing in-house, with only the highest quality materials, Keencut can guarantee that the Sabre Series 2 will provide reliable long-lasting and accurate service. All Keencut products are offered with a comprehensive five year guarantee
In the box
100 medium duty utility blades
10 Graphik blades
1 Graphik blade holder (fitted)
1 rotary blade holder
1 medium duty blade holder
Materials cut
Semi-rigid materials
PVC foamboard = 13mm (1/2 inch)
Corrugated / fluted plastic e.g Correx = 13mm (1/2 inch)
Corrugated cardboard = 13mm (1/2 inch)
Foam centred board = 13mm (1/2 inch)
Rigid materials (scoring only)
Cast acrylic / Plexiglas = 3mm (3/32 inch)
Flexible materials
Banners
Magnetic sheet
Film
Self-adhesive vinyl
Textiles and delicate materials
Accessories
Stand pack for Sabre S2
Heavy duty stand with locking castors, waste catcher and roll feed bar that can be positioned quickly and easily where required
Product Information Click Button
Sabre extended squaring arm
An optional extended squaring arm (91cm or 36”), set at 90 degrees to the slideway to improve accuracy and versatility.
Product Information Click Button
Graphik blades
A double ground cutting edge, with special tip design to increase durability and reduce tip breakage. Suitable for cutting all types of materials especially tougher materials where extra stability is required.
Product Information Click Button
Medium duty utility blades
A double ground edge, reversible blade suitable for cutting all types of material
Product Information Click Button