ProSolv Matte Wrap Kit
- One roll of GRS ProSolv Premium Cast Matte Wrap Vinyl
- One roll of Fedrigoni 12 YR Cast Matte Laminate
Promotional Sales Price $849.95
Good until December 31st 2024
ProSolv Wrap Kit Includes the following
More information below in the extended product description or click on the buttons below to be directed to more information about the vinyl and laminate
You Must be Logged in to Add the Item to your Cart.
Description
- Key Features and Benefits
- Face Film Face Film:
- White CAST Print Film Gauge: (ISO 2286-3) 2 mil (55 micron) nominal Printer
- Compatibility:
- Latex, Eco-Solvent, Solvent, UVC, UV Gel
- Adhesive Type: Permanent grey solvent-based acrylic with air channels/bubble free Application temperature: +5C to +60C Service temperature: -30C to +110C Release Liner Weight: 146 gsm nominal
- Type:
- Structured lay-flat with PE coating Finishes Gloss Roll Size 54"x25' 54" x 150'
- Durability Shelf Life:
- 2 years from date of manufacture when stored in proper conditions 70*F and 50% RH. External weathering: 7 years. This refers to the unprinted vinyl. Refer to ink manufacturer for the durability of the finished product.
- Application
- Allow a minimum of 24-48 hours for the solvents to dry off before application of the overlaminate, or to the vehicle. Depending on the print and drying conditions this can often be in excess of 48 hours. Retained solvents will reduce adhesion levels. Successful vehicle wrap application requires the necessary techniques. Apply dry to ensure the best adhesion. Use gentle heat to allow conformability. Do not overstretch as this will cause the application to fail. After application ‘superheat’ the film into recesses at 100-105°C. The user should determine the suitability of the substrate.
- Face Film
- 1.4 mil Clear Cast Vinyl
- Solvent based Acrylic Clear Adhesive
- Durability:
- 7-year Premium Film, Unprinted (under normal conditions, Mid-Country, USA) Complex Curves, Simple Curves, Flat surfaces, Rivets
- Liner:
- Highly Stable 138g/sqm Silicone Coated Kraft Paper
- Finishes
- Matte Finish
- Roll Size
- 54" x 150'
- Durability
- Shelf Life: 2 years
- External weathering: 7 years (unprinted vinyl. Refer to ink manufacturer for the durability of the finished product)
- Material Handling
- This product is suitable for cold lamination using a laminator.
- Ensure that the material has reached room temperature and relative humidity of 50% before use.
- Over-laminating
- Suitable for use on Solvent, Eco-Solvent Inkjet, and Latex prints.
- The product is matched to GRS ProSolv Cast Every Day Vehicle Wrap Film. Matched laminates prevent tunneling and delamination.
- Allow the inks to cure before over-laminating, usually 24-48 hours. Failure to do so can cause delamination, tunneling, and shrinkage.
- Apply around 30*C on the top roller to prevent silvering of the adhesive.
- The user should determine the suitability of the overlaminate to the print media.
GRS ProSolv Premium Cast Wrap Vinyl with Matching Matte Laminate
GRS ProSolv Premium Cast Wrap Vinyl
GRS ProSolv 1.4 mil Clear Premium Matte Cast Wrapping Laminate Film
Key Features and Benefits